中文(简体) Português English (US) Français Deutsch Italiano 日本語 한국어 Русский Español
  • facebook
  • twitter
  • linkedin
  • youtube
NEWBTHPL has state-of-the-art test facility for LED Lightings with C-Type Goniophotometer NEWEMI/EMC Test facility approved by FCC/IC.NEW BTHPL empanelled by BEE for Check Testing of Energy Rated productsNEW EESL empanelled BTHPL to test LED Lamps & Street Lights under DELP programNEW BTHPL can now test Batteries, CE Marks & Telecom Products.

WC & Sanitarywares

Bharat Test House has been enlisted with the IAPMO India(International Association of Plumbing and Mechanical Officials) for Product Certification of Plumbing & WC (Water Closet) Sanitary Wares as per the requisite standard's requirements.The test facility covers different WC & Sanitary-ware products including sub-assemblies/units/plumbings namely Vitreous Sanitary Appliances (Vitreous China) – (WC Pans, Bidet, Squatting pans, Urinals, partition plates, pedestals, short pedestals, wash basins, Laboratory sinks, drinking fountains, flushing cistern and covers) IS 2556 P1-15, Ceramic Plumbing Fixtures ASME A11.2:19.2:2008/CSA B-45.1-08

S.No.
Test Parameter of IS:2556 P1-15 & ASME A-11.2:19.2:08/CSA B-45.1-08* Test Clause
01
Application of  glazing
(Cl-11)
02
Blemish/Defects:Wavy Finish:Discolouration: Spots: Blisters & Pin hole: Bubbles & Specks: Visible surface other than above:Polishing marks:Minimum  thickness at any point 4.1.1 of ASME A11.2:19.2:2008 CSA B-45.1-08 Clause 6 of IS 2556 (P1):1994
03
Warpage & Crazing   
IS 2556 P1: 6.2 & 6.4 of ASME A11.2:19.2:/ CSA B-45.1
04
Water absorption & Modulus of rupture
IS 2556;P1 ASME A11.2:19.2 CSA B-45.1
05
Chem.resistance& Resistance to stains & burns
Annex B&C of IS: 2556 P1
06
Field installed flange test & Overflow test
6.5 ,6.6 /6.9 of ASME/ CSA B-45.1
07
Construction & Dimensions
Pt 1 to 9 and 14 to 17 of IS 2556
08
Load bearing capacity Structural integrity test
IS 2556 P2;P8;P9;P15;P16; P17&ASME A11.2:19.2/CSA B-45.1
09
Joint seal test & Auger test
ASME A11.2:19.2/ CSA B-45.1
10
Toilet Paper test & Smudge test
IS 2556 P2;P3;P8;P14;P15 &P16
11
Holding capacity test & Ball test Granule & ball
IS 2556 P2;P8;P14;P15;P16; ASME A11.2:19.2/ CSA B-45.1
12
Saw Dust test
IS 2556 P2;P3;P15
13
Trap seal Depth determination & restoration
ASME A11.2:19.2:08/ CSA B-45.1
14
Water consumption & Surface wash test
ASME A11.2:19.2:08 CSA B-45.1
15
Mixed media&Drain line trnspt characterization
ASME A11.2:19.2 CSA B-45.1
16
Dye test Cleanability & Finish
ASME A11.2:19.2 CSA B-45.1-08/. IS 2556 Pt6; 1 to 9 & 14 to 17
17
Splash test*
IS 2556 P2;P3;P15
* NABL Inspection Completed & Aproval Awaited

 

Water Meters

Looking into the growing demand and sub-sequentially mandatory requirement of utilities for on-line water meter by the household as well as other consumers, BTHPL has established the test facility to test the water meant for domestic applications as per IS: 779:1994 & ISO 4064.This would enable customers to verify the overall quality and accuracy of the water meters at nominal test charges.

S.No.
Domestic Water Meter -IS :779:1994* Test Clause
01
Pressure tightness test
Cl-10.1
02
Loss of pressure
Cl-10.2
03
Metering accuracy
Cl-11.1
04
Minimum starting flow
Cl-11.2
05
Temperature suitability
Cl-10.3
* NABL Inspection Completed & Approval Awaited
Home  |  About Us  |  Services  |  Career  |  Contact Us  |  Image Gallery  |  Sitemap
            Copyright © 2016 | www.bharattesthouse.com | All rights reserved.
Design & Develop By : Bharat Group